OEM

Altra~Bond 3094® is a two component, Strontium Chromate based epoxy primer designed for use on aluminium structures, sheets and extrusions and galvanised substrates. It has

• Excellent adhesion and anti- corrosive properties
• Fast dry to recoat
• Compatibility with high performance epoxy and urethane systems

Altra~Bond 3094® is ideal as

• A primer for aluminium topsides, alloy hulls and a general primer for trailed alloy boats
• A primer for the exterior of petrol and bulk “dolphin” tanks
• A primer for signwriting on alloy surfaces

• An excellent general purpose aviation primer

Altra~Etch® is a rapid dry, single pack etch primer used in many light industrial coating systems.

Altra~Etch® may be directly over coated with a wide range of two component and single component build coats or finish coats.

Altra~Etch® is recommended:

• As a high performance key coating
• As a prefabrication holding primer
• As a conventional etch over surfaces including:
• Galvanised steel
• Zinc sheet
• Aluminium sheet and Extrusions
• Mild steel
• Zinc & Aluminium Spray

Altra~Etch® is recommended for use on:
Machinery

• Electrical Switchboards
• Heavy duty earthmoving equipment
• Light Industrial equipment, conveyors, compressors etc
• Forkhoists and various transport related items
• Chassis

Proprietary cross-linking epoxy-acrylic gloss finish

Fast cure iso-cyanate-free epoxy-acrylic gloss coating for industrial and marine and off-shore applications where use of polyurethane coatings is banned or undesirable.

• Isocyanate free
• Early through-curing
• Excellent colour and gloss retention with good chalking resistance
• Lead and chrome-free colour range
• Good chemical resistance
• Excellent durability

Carboguard® 504 is an inert non-inhibitive anti-corrosive modified polyamide cured epoxy primer.

• Excellent primer for water and many aqueous chemicals immersion service when top-coated with an approved finish
• Excellent adhesion to difficult substrates
• Excellent holding primer
• Excellent corrosion resistance
• Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types 1, 2 & 3.
• Good abrasion resistance
• Very good aged re-coatability
• Resists splash and spillage or fumes of a wide range of chemicals
• Easy application by brush, roller or spray
• Ideal tie-coat over inorganic zincs
• Versatile - can be used on most substrates under many different types of topcoat
• Long pot-life
• Excellent maintenance touch-up primer for hand-cleaned substrates

A user-friendly primer for epoxy or polyurethane systems in environments not suited to zinc primers due to acidic or alkaline fallout or splash & spill.

An all purpose epoxy coating that has a variety of attributes including low temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection.

Carboguard 635 can be used direct to metal as a corrosion resistant primer or as an intermediate coating over primers.

It is suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure to handling.

It may also be used for immersion in both fresh or salt (marine) water.

A highly versatile multi-purpose Phenalkamine Epoxy High Build coating.

Carboguard® 636 is an advanced technology coating suited to marine and industrial applications and suitable for atmospheric and many immersion exposures. The DTM properties make Carboguard® 636 a versatile coating in maintenance and new work applications. Syntactic foam modification gives Carboguard® 636 unique thermal shock resistance and flexibility

• Marine systems - below the waterline, and fresh water systems
• AS4020 Potable Water Approval for Haze Grey & Grey/White colours only.
• Vast range of industrial environments
• Very good flexibility – resists chipping and aged embrittlement
• Lighter weight – 13% lighter than most similar coatings
• Versatile, surface tolerant coating suitable for water jet cleaned surfaces
• Tolerant to surface dampness - particularly when brush applied
• Good thermal qualities; excellent for use under insulation to 120ºC
• Good adhesion to tight rust - especially when used in conjunction with Rustbond® or Altra~Lock 576
• Self-priming (DTM) for many applications
• Fast dry to recoat and excellent dry to handling
• Low temperature cure to below freezing; -5°C

High performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service.

• Fully tintable epoxy high build
• Suitable for all industrial and marine environments.
• Carboguard 690 is also certified for use in both food processing and potable water storage and reticulation

Food Processing

NZ AsureQuality assessed & passed for food/beverage including dairy farm & factory non-incidental contact. Ref: H3108

Potable Water Approval – AS 4020:2005

Australian Water Quality Centre

Carboguard 690 White*        Reference: 130243-2009-CSR-1

Carboguard 690 N53 Bl/Gr*  Reference: 130243-2009-CSR-2

AMS Laboratories

Carboguard 690 N35 Lt. Gr* Reference: AMS 1316537A

This fast cure high build polyaspartic coating provides excellent corrosion protection as well as long term weatherability in just one coat.

It can be applied direct to metal (DTM) at 150 to 250 µms dry film thickness (DFT) to eliminate the need for typical primers and/or intermediate coats. This significantly speeds up the painting process, saves labor, and saves money without sacrificing performance. If even better corrosion protection is desired it can be applied over our time proven Carbozinc or Carboguard primers.

High gloss polyurethane finish with exceptional weathering performance characteristics.

Used extensively in virtually every market sector, including marine exposure, Carbothane 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.

• Specialised UV protection designed for Australian and New Zealand exposures
• Highly recoatable, with minimum preparation requirements
• The high solids (70%) formulation creates a very cost effective coating

A very economic, two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates.

Carbozinc 859 EZ2 can be applied by conventional, airless, or plural component spray. Recommended where a high performance, highly corrosion resistant zinc primer is desired.

Typical applications include structural steel, tanks, piping, equipment and other miscellaneous parts in industrial, offshore or architectural projects.

E~Line® 949 is a fast cure, economical, high gloss, aliphatic polyurethane designed for use in areas where good gloss and colour retention are required.

E~Line® 949 is ideal for use where a polyurethane finish is specified and where economy and rapid drying are desirable. It will provide good gloss and colour retention as well as resistance to moderate to severe corrosive environments for:

• Structural Steel
•  Shop application
• Chemical processing industry
• Pulp and paper industry
• Dairy industry
• Bridges and storage tanks

Advantages:

• Inhibits corrosion of steel-higher levels of ZP than other alkyd primers
• Capable of high film build per coat
• Lead free
• Superior performance on power and hand tool cleaned surfaces
• Easy application by brush, roller or spray
• Excellent flow and levelling
• Can be used on marine topsides

Approvals:

• MAF Meat, Fish and Game Division
• AS4089-1993 : Type 1 and 2 primer Meets and exceeds AS4089-1993* in particular adhesion and performance clauses:5.5.4; 5.5.5; 5.5.6

* Independently assessed by NZ DSIR (1992), Report No. SCPP 92/1160T
Meets requirements of AHB 522-1994 (Auckland Harbour Bridge maintenance)

Isotal is a premium quality alkyd gloss enamel which is designed to protect and give good appearance to:

• Properly primed steel and other metal surfaces
• Tank exteriors
• Bridges and pipes
• Commercial Marine exterior areas such as freeboards, decks, houses and superstructures
• Commercial Marine interior areas such as engine rooms, passageways and equipment

Isotal Undercoat is a premium quality alkyd undercoat which is normally used under Isotal Enamel on properly primed surfaces. It can be used in areas such as:

• Properly primed masonry, steel and other metal surfaces
• Marine exterior areas such as freeboards, decks, houses and superstructures
• Marine interior areas such as engine rooms, passageways and equipment
• Wooden structures
• Tie coat over aged enamel systems prior to re-finish coating