logo

Zinc Rich Primers

Altra~Zinc 605

Altra~Zinc® 605 is a high performance, two component, reinforced  zinc-rich primer designed for use as a cathodic primer for protecting steel exposed to a variety of environments.

Altra~Zinc® 605 is an ideal, rapid dry zinc primer for use on most mild steel fabricated equipment where it's reinforced  binder system is required including:

  • Heavy Machinery
  • Conveyors, Pipework etc
  • Structural Steel
  • Original Equipment Manufacturing (OEM)

 

Limitations of Use:

  • Do not topcoat with alkyd coatings
  • Not suitable for solvent, chemical or fresh water immersion service

 

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carboweld 11

Made to Order or imported lines subject to availability.

Self curing, zinc filled inorganic weldable holding primer.

A weldable inorganic zinc primer, which is both self curing and weldable. Welds made over Carboweld 11 coated steel are equal in every respect to welds joining uncoated steel prior to fabrication.

Weld spatter does not adhere to or damage the coating. Coated steel can be welded as quickly and easily as bare steel without loss in strength or consistency of the weld.

May be top coated with Carbozinc 11 and most conventional paints and coatings.

Carboweld 11 is used as a preconstruction primer in shipyards and fabricating shops. It has many cost saving advantages over conventional shop primers

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbozinc 11

Time-tested corrosion resistant primer that protects steel galvanically in the harshest environments. For over four decades, Carbozinc 11 (CZ 11) has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide

 

  • CZ 11 meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
  • Rapid cure. Dry to handle in 45 minutes at 16°C and 50% relative humidity.
  • Low temperature cure down to -18°C.
  • High zinc loading.
  • Meets FDA requirements in grey color.
  • Available in ASTM D520, Type II zinc version.
  • Very good resistance to salting.
  • May be applied with standard airless or conventional spray equipment.
  • Complies with the composition and performance requirements of:
    • AS/NZS 3750.15, Type 4
    • AS 4848.1:2006 Single Coat Inorganic Zinc Silicate

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbozinc 11 WB

Made to Order or imported lines subject to availability.

Carbozinc 11 WB is a water-based inorganic zinc rich primer that protects steel galvanically, eliminating subfilm corrosion. It meets VOC regulations while providing the proven performance of silicate zinc rich technology. It may be used as a primer under many different types of topcoats

 

  • Excellent corrosion protection
  • High zinc loading per square metre
  • Zero VOC
  • Good resistance to salting
  • Fast curing, quick handling
  • Excellent application characteristics (less likely to pump packing or tip plug)
  • Meets Class B slip coefficient* and creep testing criteria for use on faying surfaces.
  • Conforms to AS/NZS 3750.15 Type 3

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbozinc 858

NEW 4:1 Ratio

Low VOC organic zinc epoxy steel primer with quick cure-to-topcoat characteristics for in-shop  applications and quick turnaround requirements in the field. Carbozinc 858 has very good adhesion and undercutting resistance and is excellent for use as a corrosion resistant primer for a variety of applications

 

  • Meets SSPC Paint System 20
  • Fully complies with AS 3750.9:1994 Type 2 Organic Zinc Rich
  • Low temperature cure down to 2°C
  • Protects against undercutting corrosion
  • May be applied with standard airless or conventional spray equipment
  • VOC compliant to current AIM regulations

Availability :

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbozinc 859 EZ2

A very economic, two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates.

Carbozinc 859 EZ2 can be applied by conventional, airless, or plural component spray. Recommended where a high performance, highly corrosion resistant zinc primer is desired.

Typical applications include structural steel, tanks, piping, equipment and other miscellaneous parts in industrial, offshore or architectural projects.

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Zinkex 100

Zinkex 100 is an excellent primer for chlorinated rubber and vinyl finish coats. It may be used as a “cold galvanising” coating for the repair of hot-dip galvanised surfaces.

Zinkex 100 may be left untopcoated in non-corrosive atmospheres.

Zinkex 100 is suitable for maintenance use in the following areas:

  • Chemical Industry
  • Food Industry
  • Dairy Industry
  • Steel Bridges
  • Transmission Towers

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet 

Offline

* Sorry, we aren’t online at the moment. Please fill out the form below and we will get back to you as soon as possible.