A solvent-free, epoxy resin specifically formulated for use as a primer on porous concrete. Can be used as for coving and patching when used in conjunction with select Altex Ancillary products – Contact Technical Services for further information.

FEATURES:

• Low viscosity which aids penetration
• High solids
• No VOC
• Solvent-free
• Can be squeegee applied – Refer Technical Services for more information

A three component, solvent free high strength multi-purpose epoxy mortar.
Commonly used as a subfloor for resinous toppings where a high strength thin section screed is required. Can be laid to falls and feathered down to a minimum thickness of 1mm, maximum thickness of 50mm (in one application)

FEATURES:

• Low VOC / High solids
• Low odour and low taint
• Durable, high strength abrasion and impact resistance
• Solvent-free
• Easy to apply by steel trowel
• Excellent bond strength
• Compressive strength: >45 N/mm²

A high-performance, multi-purpose flooring epoxy coating that is easy to apply. It’s ideal for use in many flooring environments such as workshops, warehouses, factories, washrooms etc.
Available in a variety of standard colours.

FEATURES:

• Self-priming on suitably prepared concrete, or over suitably primed surfaces
• Low odour
• Low viscosity
• Low VOC / High solids
• Solvent-free
• Can be top coated with Carbothane 133 LH or E~Line series - Refer to Technical Services for further advice
• Resistant to hydraulic fluids and Skydrol once fully cured
• Tested to AS 4586:2013, Slip resistance classification of new pedestrian surface materials - Refer Certification section for more information.

A solvent-free, epoxy resin specifically formulated for use as a primer on porous concrete under Altra~Floor EF. Can be used as for coving when used in conjunction with select Altex Ancillary products – Contact Technical Services for further information.

FEATURES:

• Ideal for porous cementitious surfaces
• Low viscosity
• Zero VOC / High solids
• Solvent-free

Deckshield PDS Membrane is a medium viscosity polyurethane modified reactive methyl methacrylate (PUMMA) resin.

Uses
Typically used as a crack bridging waterproof membrane within the Deckshield ED Rapide system. This highly elastomeric membrane remains flexible and crack bridging to -20°C.

Deckshield UV (white) is a 2 component, high gloss, UV stable, abrasion resistant aliphatic, coloured polyurethane sealer.

Uses
Typically used as a high wear resistant UV stable sealer to further enhance the performance of Flowcrete’s flooring systems.

Deckshield UV (WB) is a high solids, 2-component, water based, aliphatic, coloured, UV light stable, polyurethane coating.

Uses
Used as a final coloured seal coat for the Deckshield range as well as other Flowcrete systems. This will provide a colour stable, low odor, abrasion resistant and UV light stable finish.

Deckshield UV (WB) is a high solids, 2-component, water based, aliphatic, clear, UV light stable, polyurethane coating.

Uses
Used as a clear coat over Flowcrete’s decorative Terrosso flooring systems and for sealing of cementitious substates. This will provide a colour stable, low VOC, abrasion resistant gloss finish.

Deckshield UV (clear) is a 2 component, high gloss, UV stable, abrasion resistant aliphatic polyurethane sealer available in clear or coloured.

Uses
Typically used as a high wear resistant UV stable sealer to further enhance the performance of Flowcrete’s flooring systems.

Flowcoat OP is a hardwearing and solvent free, epoxy resin flooring solution used to service various manufacturing workspaces by delivering the level best in protective and chemical resistant floor coatings.

The low maintenance, seamless and hygienic finish is aesthetically attractive.  Designed to create a uniform "Orange Peel" surface texture, Flowcoat OP may be used as a hard wearing protective floor coating.

Product Benefits

• Chemical Resistant
• Hard wearing
• Solvent free and low odour
• Attractive, light reflectant appearance
• Seamless and hygienic finish
• Low maintenance

Flowfast Primer is a low viscosity, colourless, 2 component reactive methyl methacrylate (MMA) resin with good moisture tolerance.

Uses
Typically used as a primer to give excellent bonding to metal (e.g. iron, aluminium, stainless steel), ceramic tile and concrete substrates.

Flowfast Binder is a medium viscosity, colourless, 2 component reactive methyl methacrylate (MMA) resin.

Uses
Typically used as a Binder within the Flowfast flooring range. Systems using Flowfast Binder as the main binder must always be treated with a Flowfast Sealer (e.g. Flowfast Sealer or Flowfast Flexible Sealer). Flowfast Binder is a general purpose resin; it must not be used in areas subject to heavy hot water loading.

Flowfast 215 Flexible Binder is a 2 component reactive flexible methyl methacrylate (MMA) modified resin.

Flowfast 215 Flexible Binder is typically used in the following applications.

• To provide a wearing and protect coats to Flowcrete MMA Waterproof membranes.
• Flexible floor coverings especially if exposed to low temperatures e.g. coolers and freezers.
• As a wearing layer for outdoor applications exposed to heavy mechanical loadings and rapid temperature variations i.e. ramps, bridges and carparks.
• As an intermediate coat for floors exposed to hot water.

Flowfast 319 Flexible Sealer is a medium viscosity, UV-resistant, 2 component reactive methyl methacrylate resin (MMA).

Uses
Flowfast 319 Flexible Sealer is used as part of the Deckshield Rapide and Flowfast range. In the liquid state it is blue-violet in colour. After polymerisation the sealer dries clear. Flowfast Flexible Sealer resists occasional hot water spillage up to 80°C. The flexibility and high UV resistance are also ideal for outdoor applications.

Flowfast Quartz Scatter is a hard wearing, decorative, fast curing, methyl methacrylate (MMA) resin floor topping made up of colour stable quartz granules encapsulated in a clear resin binder.

Flowfast Quartz Scatter has been developed to enable very fast track applications, therefore dramatically reducing down time.

Product Benefits

• Fast curing and rapid installation
• Seamless and hygienic finish
• Excellent wear and impact resistance
• Good slip resistance
• High abrasion resistance
• High chemical resistance

Flowfresh Coating is a 4-component, solvent free, antimicrobial coloured polyurethane cement coating with a matte finish.

Uses
Can be used as a seal coat for Flowfresh flooring systems including coving. This will provide a hard-wearing, chemical resistant, antimicrobial coloured sealer. Additionally Flowfresh Coating can be used as an alternative to Flowfresh Primer.

Flowfresh Coating Satin is a 4-component, anti-microbial, solvent free, coloured polyurethane cement coating with a satin finish.

Uses
Can be used as a seal coat for Flowfresh flooring systems including coving. This will provide a hard-wearing, chemical resistant, antimicrobial coloured sealer in a semi-gloss/satin finish.
Environment

Flowfresh SL is a self-levelling antimicrobial flooring solution with impressive chemical and heat resistant properties designed to service the hygiene industries.

The antimicrobial polyurethane resin floor finish is easy to clean and sterilise making it ideal for use in dry or semi-wet processing zones such as food or pharmaceutical packaging.

Product Benefits:

• Antimicrobial
• High chemical resistance
• Non-tainting, non-dusting
• High abrasion resistance
• Low odour during application
• HACCP & ISO 22916 accredited

Flowfresh Sealer is a 100% solids, gloss, antimicrobial, solvent-free polyurethane coloured coating for the Flowfresh SR system.

Uses
Can be used as a seal coat for Flowfresh SR system or as a stand-alone product. This will provide a hard-wearing, slip resistant, chemical resistant, antimicrobial coloured gloss finish.

Flowseal UV Satin is a 2-component, UV stable, abrasion resistant aliphatic polyurethane sealer in a Satin/Semi gloss finish.

Uses
Typically used as a high wear resistant UV stable sealer to further enhance the performance of Flowcrete’s flooring systems.

Flowseal UV Satin (clear) is a 2 component, UV stable, abrasion resistant aliphatic polyurethane sealer in a Satin/Semi gloss finish.

Uses
Typically used as a final seal coat for Flowcrete decorative systems. This will provide a high abrasion and UV light stable satin finish. Can also be used as a seal coat applied directly onto honed and polished concrete.

Flowcrete Universal Resin is a high performance, low viscosity, solvent free epoxy resin based on advance resin technology.