logo

Carboquick 200

This fast cure high build polyaspartic coating provides excellent corrosion protection as well as long term weatherability in just one coat. It can be applied direct to metal (DTM) at 150 to 250 microns dry film thickness (DFT) to eliminate the need for typical primers and/or intermediate coats.
This significantly speeds up the painting process, saves labour, and saves money without sacrificing performance. If even better corrosion protection is desired it can be applied over our time proven Carbozinc or Carboguard primers.

FEATURES:

  • Fast cure speeds the painting process
  • High build, 150 to 250μm DFT per coat
  • Excellent corrosion protection
  • Meets ISO 12944-6 C3 High, one coat applied DTM
  • Saves significant time, labour and money
  • Excellent weathering
  • Exceeds SSPC Coating Specification No. 39 Level 3A, highest level for aliphatic polyurea
  • Exceeds SSPC Coating Specification No. 36 Level 3A, highest level for aliphatic polyurethane
  • Very good flexibility and elongation
  • Excellent abrasion and impact resistance
  • Excellent wetting and adhesion
  • Extremely durable to help provide long service life
  • Low VOC and low HAPS
  • Indefinite recoatability
  • Successful case history for use as a quick-turn line marking system. Refer to your local representative for further information.

Availability :

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbothane 130 Clear Coat

Clear Aliphatic Acrylic Polyurethane with HALS and UV absorber technology

Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets including marine exposures, Carbothane 130 Clear Coat provides a smooth, durable finish that provides superior resistance to colour fade of base-coats, corrosion, abrasion and chemical exposure.

  • High solids, low VOC content
  • Excellent weatherability
  • Superior impact and abrasion resistance
  • Excellent chemical resistance
  • Excellent resistance to graffiti removers

Carbothane 130 Clear is frequently applied over conventional, pigmented polyurethane finish coats to provide an optimum surface for anti graffiti management.

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbothane 133 LH

Aliphatic Acrylic-Polyester Polyurethane Satin Finish

High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colours

  • Outstanding performance properties in both mild and aggressive environments
  • High build; suitable for many two-coat systems
  • Approved for use in food & dairy processing plants
  • Application by spray, brush or roller
  • Indefinite recoatability
  • VOC compliant to current AIM regulations

 

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbothane 134 HG

Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.

FEATURES:

  • High solids, low VOC content
  • Excellent weatherability
  • Exceeds SSPC Paint 36 specification for a Level 3 urethane
  • Conforms to the requirements of AS/NZS 3750.6:2009, Type 1 "Paints for Steel Structures - Full Gloss Polyurethane (two pack)"
  • Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
  • Excellent flow characteristics allow for application by spray or roller
  • Superior impact and abrasion resistance
  • Indefinite recoatability

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

E~Line 379

High gloss, high performance, two component, chemically cured polyaspartic urethane designed for use in areas where maximum gloss and colour retention are required.

FEATURES:

  • Polyaspartic acrylic technology provides exceptional gloss and colour retention
  • Outstanding cosmetic properties
  • Outstanding abrasion resistance
  • Excellent durability due to high flexibility and toughness
  • Exceptional retention of cosmetic properties due to high UV resistance
  • Outstanding chemical resistance
  • Light colours along with a finish coat of Carbothane 130 Clear Coat may be used as an anti-graffiti system due to the excellent solvent resistance - refer also to and Easy~Clean SX Additive
  • High volume solids - Low VOC
  • Available with Ultra-Fresh Antimicrobial Additive where hygienic germ-free coating systems are required.
  • Tested and in compliance to Main Roads WA - Specification 908 and NZTA (Waka Kotahi) - Specification S10 for Anti-Graffiti Coatings
  • Approved for use in food & dairy processing plants

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

E~Line 949

E~Line 949 is a fast cure, economical, high gloss, aliphatic polyurethane designed for use in areas where good gloss and colour retention are required.

E~Line 949 is ideal for use where a polyurethane finish is specified and where economy and rapid drying are desirable. It will provide good gloss and colour retention as well as resistance to moderate to severe corrosive environments for:

  • Structural Steel
  • Shop application
  • Chemical processing industry
  • Pulp and paper industry
  • Dairy industry
  • Bridges and storage tanks

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Multi-Gard GP 48AU

Multi-Gard GP 48 is fast-dry polyurethane coating which provides a high gloss finish which has excellent corrosion, abrasion and chemical resistance. The Multi-Gard GP (general purpose) products are formulated to protect steel substrates in a variety of service exposures typical of industrial OEM equipment destinations and commercial marine conditions. The Multi-Gard line tends toward rapid cure to handle and re-coat to facilitate through-put in shop painting applications.

FEATURES:

  • Direct-to-metal (when used with GP 88 Part B)
  • Fast dry and handle times
  • Excellent abrasion and chemical resistance
  • Excellent gloss and colour retention
  • Suitable for OEM applications
  • Excellent aged re-coatability when cleaned with Altex P40 Cleaner
  • Applied by air, or airless spray

Availability :- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Offline

* Sorry, we aren’t online at the moment. Please fill out the form below and we will get back to you as soon as possible.