logo

Altra~Shield WB-V Primer Finish

Made to Order or imported lines subject to availability.

A two-pack low VOC, waterborne epoxy gloss finish. The cured film is non-yellowing with high surface hardness and excellent flexibility. It exhibits excellent adhesion and water resistance and is tolerant of application over damp surfaces. It has excellent solvent resistance which makes it very resistant to graffiti. Self-priming over concrete, plaster, and fibre cement substrates.
Recommended for interior use or in-service conditions not directly exposed to extended periods of sunlight.
The low VOC and exceptionally low odour makes it an ideal coating for food process areas, hygiene areas and laboratories.

FEATURES:

  • Brushing and rolling properties are similar to single pack waterborne paints
  • Moisture tolerant application over damp surfaces
  • Quick tack-free and recoat time giving the potential for multiple coats to be applied in a single day
  • High surface hardness with excellent resistance to abrasion
  • Excellent resistance to chemicals, solvents, and water
  • Tenaciously adheres to a wide range of surfaces
  • Can be steamed clean or power-washed
  • The chemical resistance is similar to conventional solvent borne epoxies
  • Available in pastel tone colours
  • Approved for use in food & dairy processing plants

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet 

Carboguard 636 PW

Made to Order.

High performance immersion grade epoxy that is designed as a liner for potable water tanks. This coating exhibits moisture tolerance during application, low temperature cure capability, and fast cure response for quick return to service. Product is self-priming on steel and is normally applied in two coats. Formulated for application at 120 to 180 microns DFT per coat for potable use.

FEATURES:

  • Very good flexibility – resists chipping and aged embrittlement
  • Lighter weight – 13% lighter than most similar coatings
  • Versatile surface tolerant coating
  • AS/NZS 4020 Potable Water Approval
  • Lower viscosity allows application at higher solids (less thinning) and reduced VOC at application
  • Fast dry to recoat
  • Low temperature cure to below freezing; -5°C
  • Reduced HAPS and Low VOC

 

Availability :- New Zealand

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carboguard 636 XT

A multi-purpose, advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility.

Link

 

Availability :

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carboguard 636 XT GF

A glass-flake filled, multi-purpose,advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility. Glass flake reinforcement enhances film strength,
impact resistance and barrier properties.

Availability :

View More Product Data Sheet 

Carbothane 133 LH

Aliphatic Acrylic-Polyester Polyurethane Satin Finish

High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colours

  • Outstanding performance properties in both mild and aggressive environments
  • High build; suitable for many two-coat systems
  • Approved for use in food & dairy processing plants
  • Application by spray, brush or roller
  • Indefinite recoatability
  • VOC compliant to current AIM regulations

 

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbothane 134 HG

High gloss polyurethane finish with exceptional weathering performance characteristics.

Used extensively in virtually every market sector, including marine exposure, Carbothane 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.

  • Specialised UV protection designed for Australian and New Zealand exposures
  • Highly recoatable, with minimum preparation requirements
  • The high solids (70%) formulation creates a very cost effective coating

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

E~Line 379

High gloss, high performance, two component, chemically cured polyaspartic urethane designed for use in areas where maximum gloss and colour retention are required.

FEATURES:

  • Polyaspartic acrylic technology provides exceptional gloss and colour retention
  • Outstanding cosmetic properties
  • Outstanding abrasion resistance
  • Excellent durability due to high flexibility and toughness
  • Exceptional retention of cosmetic properties due to high UV resistance
  • Outstanding chemical resistance
  • Light colours along with a finish coat of Carbothane 130 Clear Coat may be used as an anti-graffiti system due to the excellent solvent resistance - refer also to and Easy~Clean SX Additive
  • High volume solids - Low VOC
  • Available with Ultra-Fresh Antimicrobial Additive where hygienic germ-free coating systems are required.
  • Tested and in compliance to Main Roads WA - Specification 908 and NZTA (Waka Kotahi) - Specification S10 for Anti-Graffiti Coatings
  • Approved for use in food & dairy processing plants

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Phenoline 1205

Made to Order or imported lines subject to availability. 

A glass flake-filled coating with dense cross-linking that exhibits excellent overall chemical resistance to a variety of aggressive chemicals. Glass reinforcement provides added abrasion resistance, permeation resistance and internal reinforcement.

Phenoline® 1205 exhibits very good acid resistance. Excellent for lining tanks or pipes in process facilities where hot water or abrasive conditions exist. Also used as a primary or secondary containment lining for a variety of aggressive chemicals

  • Excellent resistance to ethanol, gasoline, jet fuels and solvents
  • Excellent abrasion resistance
  • Excellent thermal shock resistance
  • Excellent resistance to deionized or demineralised water up to 82°C
  • Excellent resistance to crude oil, brine or water up to 93°C

 

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Reactamine Joint Seal

Made to Order or imported lines subject to availability. 

Reactamine Joint Seal FC is a 2-component 100% solids, polyurea-based joint sealant that is self-leveling and cures in approximately 30 minutes. It works equally well with asphalt and concrete and protects interior horizontal concrete expansion and control joints from spalling, chipping and breakdown. This product can be applied at temperatures ranging from -18° to 65°C and possesses excellent chemical resistance, water resistance and thermal stability at both high and low temperatures

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Rustbond PS

Rustbond PS is a very low VOC epoxy primer/sealer that combines outstanding surface tolerance characteristics over marginally prepared substrates and user-friendly features. It accepts a variety of topcoats and can help save time and money by minimising surface preparation requirements for new construction, maintenance and overcoating projects. Rustbond PS has good pot life at higher
temperatures to help minimise waste and also cures at low temperatures down to 1.7°C with Epoxy Accelerator so you have one Rustbond product for year-round application.

Availability :

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Offline

* Sorry, we aren’t online at the moment. Please fill out the form below and we will get back to you as soon as possible.