A high-performance, multi-purpose flooring epoxy coating that is easy to apply. It’s ideal for use in many flooring environments such as workshops, warehouses, factories, washrooms etc.
Available in a variety of standard colours.
• Self-priming on suitably prepared concrete, or over suitably primed surfaces
• Low odour
• Low viscosity
• Low VOC / High solids
• Can be top coated with Carbothane 133 LH or E~Line series - Refer to Technical Services for further advice
• Resistant to hydraulic fluids and Skydrol once fully cured
• Tested to AS 4586:2013, Slip resistance classification of new pedestrian surface materials - Refer Certification section for more information.
Altra~Lock 576 is designed for use as a surface sealer, conditioner, and strengthener for porous substrates. It is especially useful in penetrating and saturating corroded surfaces where crevice corrosion cannot be treated by convention preparation methods.
Maybe overcoated with a wide range of build and/or finish coats.
Altra~Lock 576 is a rapid cure and low-temperature cure sealer which may be applied to a wide variety of substrates such as:
Made to Order or imported lines subject to availability.
Altra~Shield® WB-V is a two pack low VOC waterborne epoxy. The cured film presents a non-yellowing finish with high surface hardness and excellent flexibility. It exhibits excellent adhesion and water resistance, and is tolerant of application over damp surfaces.
Self-priming over concrete, plaster and fibre cement substrates
Very good abrasion resistance
Excellent solvent resistance (when fully cured)
Excellent resistance to alkalis
Fair resistance to acids
Resistant to common CIP chemicals & typical dairy processing by-product exposures as follows:
Penetrating primer/sealer for use on concrete substrates and Carboline Pyrocrete Fireproofing products. It performs extremely well in sealing cementitious surfaces and is designed to receive a variety of different generic types of finish coats.
Some recommended uses of 1340 include the use as a curing compound or form release agent. When applied to “green” concrete it will retard the escape of moisture during the cure period.
It is also excellent for use as a form release coating on plywood or steel forms.
An all purpose epoxy coating that has a variety of attributes including low temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection.
Carboguard 635 can be used direct to metal as a corrosion resistant primer or as an intermediate coating over primers.
It is suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure to handling.
It may also be used for immersion in both fresh or salt (marine) water.
High performance immersion grade epoxy that is designed as a liner for potable water tanks. This coating exhibits moisture tolerance during application, low temperature cure capability, and fast cure response for quick return to service.
Product is self-priming on steel and is normally applied in two coats. Formulated for application at 120 to 180 microns DFT per coat for potable use.
Very good flexibility – resists chipping and aged embrittlement
Lighter weight – 13% lighter than most similar coatings
Versatile surface tolerant coating
AS/NZS 4020 Potable Water Approval (see "Approvals NZ/AU" section)
Lower viscosity allows application at higher solids (less thinning) and reduced VOC at application
A multi-purpose, advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility.
A glass-flake filled, multi-purpose,advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility. Glass flake reinforcement enhances film strength,
impact resistance and barrier properties.
Made to Order or imported lines subject to availability.
Carboguard® 640 is a high performance, two-component, modified phenalkamine, chemically cured, immersion grade epoxy barrier coating
Carboguard® 640 is an ideal high build coating for any service or structure, marine or industrial, where water or corrosion resistance is required.
Carboguard® 640 has excellent proven long-term service case histories for marine hull externals, above & below water, and as a lining for hydro penstocks and gates and similar permanently immersed structures.
Carboguard® 640 is the barrier coating of choice under Altex Sea~Barrier™ 1000, 3000 and Alloy 100Plus antifoulings
This fast cure high build polyaspartic coating provides excellent corrosion protection as well as long term weatherability in just one coat.
It can be applied direct to metal (DTM) at 150 to 250 µms dry film thickness (DFT) to eliminate the need for typical primers and/or intermediate coats. This significantly speeds up the painting process, saves labor, and saves money without sacrificing performance. If even better corrosion protection is desired it can be applied over our time proven Carbozinc or Carboguard primers.
Clear Aliphatic Acrylic Polyurethane with HALS and UV absorber technology
Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets including marine exposures, Carbothane 130 Clear Coat provides a smooth, durable finish that provides superior resistance to colour fade of base-coats, corrosion, abrasion and chemical exposure.
High solids, low VOC content
Superior impact and abrasion resistance
Excellent chemical resistance
Excellent resistance to graffiti removers
Carbothane 130 Clear is frequently applied over conventional, pigmented polyurethane finish coats to provide an optimum surface for anti graffiti management.
High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colours
Outstanding performance properties in both mild and aggressive environments
High build; suitable for many two-coat systems
Approved for use in food & dairy processing plants
High gloss polyurethane finish with exceptional weathering performance characteristics.
Used extensively in virtually every market sector, including marine exposure, Carbothane 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.
Specialised UV protection designed for Australian and New Zealand exposures
Highly recoatable, with minimum preparation requirements
The high solids (70%) formulation creates a very cost effective coating
Carboxane 2000 is a premium, ultra-durable coating that provides outstanding gloss and colour retention for exterior exposures.
Carboxane 2000 combines the chemical resistant properties of epoxies and polysiloxanes with the weathering characteristics of premium acrylic-polyurethanes. This tightly cross-linked film results in a finish with outstanding barrier properties and weathering performance.
Time-tested corrosion resistant primer that protects steel galvanically in the harshest environments. For over four decades, Carbozinc 11 (CZ 11) has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide
CZ 11 meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
Rapid cure. Dry to handle in 45 minutes at 16°C and 50% relative humidity.
Low temperature cure down to -18°C.
High zinc loading.
Meets FDA requirements in grey color.
Available in ASTM D520, Type II zinc version.
Very good resistance to salting.
May be applied with standard airless or conventional spray equipment.
Complies with the composition and performance requirements of:
AS/NZS 3750.15, Type 4
AS 4848.1:2006 Single Coat Inorganic Zinc Silicate
Made to Order or imported lines subject to availability.
Carbozinc 11 WB is a water-based inorganic zinc rich primer that protects steel galvanically, eliminating subfilm corrosion. It meets VOC regulations while providing the proven performance of silicate zinc rich technology. It may be used as a primer under many different types of topcoats
Excellent corrosion protection
High zinc loading per square metre
Good resistance to salting
Fast curing, quick handling
Excellent application characteristics (less likely to pump packing or tip plug)
Meets Class B slip coefficient* and creep testing criteria for use on faying surfaces.
A high performance, two component, organic zinc-filled primer specifically formulated to provide corrosion protection to steel surfaces in salt and weathering environments. It has good surface tolerant characteristics where steel surface preparation may be less than ideal. It may also be used for the repair of aged inorganic zinc-rich coatings or galvanised steel surfaces.
Low VOC organic zinc epoxy steel primer with quick cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 858 has very good adhesion and undercutting resistance and is excellent for use as a corrosion resistant primer for a variety of applications
Meets SSPC Paint System 20
Fully complies with AS 3750.9:1994 Type 2 Organic Zinc Rich
Low temperature cure down to 2°C
Protects against undercutting corrosion
May be applied with standard airless or conventional spray equipment
A high-solids, zinc-filled epoxy primer for corrosion protection of structural steel in highly corrosive environments including offshore, marine and industrial. This low VOC, HAPs compliant primer has quick cure-to-topcoat characteristics for in-shop applications and quick turnaround capabilities for the field. It has excellent adhesion and undercutting resistance and is outstanding for use as a corrosion resistant primer for a variety of applications.
E~Line 949 is a fast cure, economical, high gloss, aliphatic polyurethane designed for use in areas where good gloss and colour retention are required.
E~Line 949 is ideal for use where a polyurethane finish is specified and where economy and rapid drying are desirable. It will provide good gloss and colour retention as well as resistance to moderate to severe corrosive environments for:
Pre~Fab Steel Shop Primer is a fast dry, economical, primer designed for use in engineering fabrication shops.
Advantages: Fast dry allows rapid handling of coated steel. It is suitable as a stand-alone coating in mild interior environments and provides good protection to structural steel in moderate exterior environments when topcoated with compatible alkyd or acrylic coatings.
Limitations of Use:Not designed for extended exterior exposure.
Rust Inhibiting Protective Oil is a drying “wetting oil” pre-treatment, for use on hand or power tool cleaned surfaces and sometimes with brush blasted surfaces, prior to application of (usually) High Build Rust Barrier.
RIPO forms a water resistant film and is useful in protecting steel from condensation corrosion, as encountered in particular on:
Interior of vehicle doors and body panels
Underside of surfaces on appliances, such as freezers and washing machines
Excellent rust treatment as part of a single pack coating system on; Agricultural machinery and various pieces of equipment, trailers, structural steel
Use RIPO as the first stage in restoring items as listed above. Once cured apply High Build Rust Barrier, followed by Isotal Enamel to achieve long term protective and cosmetic properties.
Rustbond PS is a very low VOC epoxy primer/sealer that combines outstanding surface tolerance characteristics over marginally prepared substrates and user-friendly features. It accepts a variety of topcoats and can help save time and money by minimising surface preparation requirements for new construction, maintenance and overcoating projects. Rustbond PS has good pot life at higher
temperatures to help minimise waste and also cures at low temperatures down to 1.7°C with Epoxy Accelerator so you have one Rustbond product for year-round application.