Altra~Lock 576 is designed for use as a surface sealer, conditioner, and strengthener for porous substrates. It is especially useful in penetrating and saturating corroded surfaces where crevice corrosion cannot be treated by convention preparation methods.
Maybe overcoated with a wide range of build and/or finish coats.
Altra~Lock 576 is a rapid cure and low-temperature cure sealer which may be applied to a wide variety of substrates such as:
Made to Order or imported lines subject to availability.
Altra~Shield® WB-V is a two pack low VOC waterborne epoxy. The cured film presents a non-yellowing finish with high surface hardness and excellent flexibility. It exhibits excellent adhesion and water resistance, and is tolerant of application over damp surfaces.
Self-priming over concrete, plaster and fibre cement substrates
Very good abrasion resistance
Excellent solvent resistance (when fully cured)
Excellent resistance to alkalis
Fair resistance to acids
Resistant to common CIP chemicals & typical dairy processing by-product exposures as follows:
A rapid cure to topcoat epoxy with high abrasion resistance along with other valuable attributes including:
fast recoat times
moisture tolerance during application and cure
excellent corrosion protection.
Carboguard 635 HAR can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. It may also be used for immersion in fresh or salt water exposures, and exhibits exceptional abrasion resistance and toughness.
High performance immersion grade epoxy that is designed as a liner for potable water tanks. This coating exhibits moisture tolerance during application, low temperature cure capability, and fast cure response for quick return to service.
Product is self-priming on steel and is normally applied in two coats. Formulated for application at 120 to 180 microns DFT per coat for potable use.
Very good flexibility – resists chipping and aged embrittlement
Lighter weight – 13% lighter than most similar coatings
Versatile surface tolerant coating
AS/NZS 4020 Potable Water Approval (see "Approvals NZ/AU" section)
Lower viscosity allows application at higher solids (less thinning) and reduced VOC at application
A multi-purpose, advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility.
A glass-flake filled, multi-purpose,advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility. Glass flake reinforcement enhances film strength,
impact resistance and barrier properties.
Made to Order or imported lines subject to availability.
Carboguard® 640 is a high performance, two-component, modified phenalkamine, chemically cured, immersion grade epoxy barrier coating
Carboguard® 640 is an ideal high build coating for any service or structure, marine or industrial, where water or corrosion resistance is required.
Carboguard® 640 has excellent proven long-term service case histories for marine hull externals, above & below water, and as a lining for hydro penstocks and gates and similar permanently immersed structures.
Carboguard® 640 is the barrier coating of choice under Altex Sea~Barrier™ 1000, 3000 and Alloy 100Plus antifoulings
This high performance epoxy coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. This makes Carbomastic 615 eminently suitable for maintenance repaint work in marginal conditions and where surface preparation is less than ideal.
It contains an inert flake reinforcement (micaceous iron oxide) to enhance film strength and performance.
High solids, low VOC
Low temperature cure
Excellent wetting properties
Excellent surface tolerance
Excellent moisture tolerance (application)
Fast cure response
Suitable for immersion service in fresh or salt water after 60 minute cure @ 24°C
High gloss polyurethane finish with exceptional weathering performance characteristics.
Used extensively in virtually every market sector, including marine exposure, Carbothane 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.
Specialised UV protection designed for Australian and New Zealand exposures
Highly recoatable, with minimum preparation requirements
The high solids (70%) formulation creates a very cost effective coating
Low VOC organic zinc epoxy steel primer with quick cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 858 has very good adhesion and undercutting resistance and is excellent for use as a corrosion resistant primer for a variety of applications
Meets SSPC Paint System 20
Fully complies with AS 3750.9:1994 Type 2 Organic Zinc Rich
Low temperature cure down to 2°C
Protects against undercutting corrosion
May be applied with standard airless or conventional spray equipment
Metal Spray Sealer - a traditional Vinyl sealer used in accordance with ASNZ2312 Zinc Metalspray systems, as well as a single package high performance aluminium filled vinyl-acrylic finish suitable for use as a general purpose aluminium finish.
Chem~Bar 900™ Aluminium may be used in all atmospheric exposures where traditional aluminium finishes may be employed; including:
E~Line 949 is a fast cure, economical, high gloss, aliphatic polyurethane designed for use in areas where good gloss and colour retention are required.
E~Line 949 is ideal for use where a polyurethane finish is specified and where economy and rapid drying are desirable. It will provide good gloss and colour retention as well as resistance to moderate to severe corrosive environments for:
Corrosion and water resistant high performance, chemically cured, sandable epoxy coating, It can be used as a tie-coat over suitable prepared, aged epoxies and polyurethanes, or can be applied as a high build sandable epoxy to remove minor defects from the surface to be coated.
Rust Inhibiting Protective Oil is a drying “wetting oil” pre-treatment, for use on hand or power tool cleaned surfaces and sometimes with brush blasted surfaces, prior to application of (usually) High Build Rust Barrier.
RIPO forms a water resistant film and is useful in protecting steel from condensation corrosion, as encountered in particular on:
Interior of vehicle doors and body panels
Underside of surfaces on appliances, such as freezers and washing machines
Excellent rust treatment as part of a single pack coating system on; Agricultural machinery and various pieces of equipment, trailers, structural steel
Use RIPO as the first stage in restoring items as listed above. Once cured apply High Build Rust Barrier, followed by Isotal Enamel to achieve long term protective and cosmetic properties.
Rustbond PS is a very low VOC epoxy primer/sealer that combines outstanding surface tolerance characteristics over marginally prepared substrates and user-friendly features. It accepts a variety of topcoats and can help save time and money by minimising surface preparation requirements for new construction, maintenance and overcoating projects. Rustbond PS has good pot life at higher
temperatures to help minimise waste and also cures at low temperatures down to 1.7°C with Epoxy Accelerator so you have one Rustbond product for year-round application.
Sea~Barrier Altra is a new, patented silyl acrylate polymer based antifouling designed to protect hulls from marine growth through an outstanding controlled self polishing hydrolysis action - the silyl acrylate, cuprous oxide and co-biocide combination provides exceptional multi-season protection.
Extensive testing and sea trials show Sea~Barrier Altra to be providing exceptionally cost effective, long term protection for commercial & deep water use. Ideal for work vessels of virtually any description such as fishing fleets, tugs and barges, container ships, passenger and vehicle ferries, and vessels trading in deep sea or coastal waters.