Elite 239 is a high-performance, high gloss, acrylic polyurethane which will provide excellent gloss and colour retention as well as resistance to moderate/severe marine environments.
Elite 239 is recommended for use on:

• Superstructures and Cabin Tops
• Topsides
• Bulwarks and Gunwales
• Handrails
• Galley and Saloon areas
• Decks (may be used with Altex Non-Skid Particles fine grade where added slip resistance is desired)

Features:

• Excellent gloss retention
• Excellent aged recoatability when cleaned with Altex P40 Cleaner
• Hard, tough coating resists damage
• Good chemical and solvent resistance
• Designed for airless and air spray

Elite 321 Brushing Polyurethane is a specialised marine finish coat formulated for brush and roller application. It is based on the latest cyclo-aliphatic polyester technology, giving a high quality and durable finish coat with long lasting gloss.
It has been especially designed for both the Professional and DIY painter for maintenance repainting of all yachts, launches and other pleasure craft. An easy to use, high performance polyurethane with good flow-out and wet-edge characteristics, balanced with rapid dry-to-touch – makes re-paint projects on the hardstand or on the water a practical proposition.

FEATURES:

• Specifically developed for brush & roller application
• Excellent cosmetic properties with an easily achieved wet look gloss
• Excellent chemical resistance
• Excellent durability
• High flexibility and toughness
• Excellent retention of cosmetic properties due to high UV resistance
• Cost effective, high performance coating solution for any aged vessel
• Two coats provide the same protection and performance as a professional, spray applied film

Elite Defender is a professional grade spraying finish coat especially formulated for use in the marine industry and provides a convenient 1:1 (Part A : Part B) mix ratio by volume.
Based on the latest aliphatic urethane technology, giving exceptional UV protection and an ultra durable gloss. It has been developed specifically to resist the high UV light exposure in both NZ and Australia.
It's designed to provide a high quality finish for both maintenance repaint and new construction in the marine industry.
Elite Defender is recommended for:

• application over either:
                Altex Epoxy Barrier Undercoat, or
                Altex Polyurethane Undercoat

• Topsides, decks, interiors and fittings that require a premium quality finish.
• Areas such as showers, heads and galleys where a highly cross-linked film is needed to resist moisture and heat.
• Masts, spars and other exterior fittings & fixtures

FEATURES:

• Convenient 1:1 volume mix ratio
• Improved wet flow coupled with excellent hold up of the wet film
• Superior 'lay-down' characteristics minimise orange peel and enhance the Distinction Of Image
• Excellent re-flow on laps and spot sprayed areas
• Available in a full range of colours – including custom colours
• Gloss levels may be reduced with Altex Flattening Paste to provide low sheen finishes for interior work

Elite Refine 250 Low Sheen Polyurethane is a specialised marine finish coat. It is based on the sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins, giving a high quality and durable finish coat as well as resistance to moderate/severe marine environments.
It has been especially designed for both the Professional and DIY painter for maintenance repainting of all yachts, launches and other pleasure craft. An easy to use, high performance polyurethane with good flow-out and wet-edge characteristics, balanced with rapid dry-to-touch – makes re-paint projects on the hardstand or on the water a practical proposition.
It is recommended for use on all vessel types to repaint:

• Topsides, Cabins & Decks Interiors,
• Masts & Fittings
• Heads & Galleys

FEATURES:

• A durable Low Sheen finish without the need for flattening agents.
• Very good resistance to moisture, solvent, and heat
• Excellent durability and colour retention
• Indefinite recoat
• High flexibility and toughness
• Cost-effective, high performance coating solution for any aged vessel
• High performance coating, that looks as good as it protects
• Low Sheen finish that reduces the appearance of underlying imperfections

Elite Refine 450 Semi-Gloss Polyurethane is a specialised marine finish coat. It is based on the sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins, giving a high quality and durable finish coat as well as resistance to moderate/severe marine environments.
It has been especially designed for both the Professional and DIY painter for maintenance repainting of all yachts, launches and other pleasure craft. An easy to use, high performance polyurethane with good flow-out and wet-edge characteristics, balanced with rapid dry-to-touch – makes re-paint projects on the hardstand or on the water a practical proposition.
It is recommended for use on all vessel types to repaint:

• Topsides, Cabins & Decks Interiors,
• Masts & Fittings
• Heads & Galleys

FEATURES:

• A durable Semi-Gloss finish without the need for flattening agents
• Very good resistance to moisture, solvent, and heat
• Excellent durability and colour retention
• Indefinite recoat
• High flexibility and toughness
• Cost-effective, high performance coating solution for any aged vessel
• High performance coating, that looks as good as it protects
• Semi-gloss finish that reduces the appearance of underlying imperfections

Regatta Gloss Enamel is designed for use as the finish coating for the Single Component Marine topsides systems.
Regatta Gloss Enamel can be used on :

• Canoes
• Tenders
• Dinghies
• Trailer yachts
• Power boats
• For signwriting
• Boot stripes
• For upgrading existing enamel systems, subject to correct preparation and undercoating
• And numerous other DIY projects requiring a high-quality enamel finish coat.

FEATURES:

• High gloss enamel finish
• Superior, “long oil” marine quality
• Good weathering properties
• Excellent gloss retention
• Good application characteristics
• Compatible with Altex Flattening Paste to reduce the gloss for interior colours
• May be modified with the addition of Regatta 2K Additive to speed up cure and enhance overall performance. This effectively creates a “Two Pack” finish coat