A high performance, immersion grade (fresh & salt water) chemically cured epoxy primer. Suitable for use over suitably prepared mild steel, galvanised steel, other non-ferrous metals, and most GRP substrates.

FEATURES:

• Excellent primer for water and many aqueous chemicals immersion service when topcoated with an approved finish
• Excellent adhesion to difficult substrates
• Excellent holding primer
• Excellent corrosion resistance
• Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types 1, 2 & 3.
• Approved for use in NZ Food Processing Plants
• Good abrasion resistance
• Very good aged re-coatability
• Resists splash and spillage or fumes of a wide range of chemicals
• Easy application by brush, roller or spray
• Ideal tie-coat over inorganic zincs
• Versatile - can be used on most substrates under many different types of topcoat
• Long pot-life
• Excellent maintenance touch-up primer for hand-cleaned substrates
• A user-friendly primer for epoxy or polyurethane systems in environments not suited to zinc primers due to acidic or alkaline fallout or splash & spill
• Excellent tie-coat over high build epoxies as an extended 2-3 day recoat window with Sea~Barrier Antifoul series – Carboguard 504 Grey is preferred. Refer to Technical Services for further advice

Availability: Australia only

A high performance, immersion grade (fresh & salt water) chemically cured, zinc phosphate epoxy primer. Suitable for use over suitably prepared mild steel, galvanised steel, other non-ferrous metals, and most GRP substrates.

FEATURES:

• Excellent adhesion to difficult substrates
• Excellent holding primer
• Excellent corrosion resistance
• Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types 1, 2 & 3.
• Good abrasion resistance
• Very good aged re-coatability
• Resists splash and spillage or fumes of a wide range of chemicals
• Easy application by brush, roller or spray
• Versatile - can be used on most substrates under many different types of topcoat
• Long pot-life
• Excellent maintenance touch-up primer for hand-cleaned substrates
• A user-friendly primer for epoxy or polyurethane systems in environments not suited to zinc primers due to acidic or alkaline fallout or splash & spill
• Excellent tie-coat over high build epoxies as an extended 2-3 day recoat window with Sea~Barrier Antifoul series. Refer to Technical Services for further advice

Made to Order.

High performance immersion grade epoxy that is designed as a liner for potable water tanks. This coating exhibits moisture tolerance during application, low temperature cure capability, and fast cure response for quick return to service. Product is self-priming on steel and is normally applied in two coats. Formulated for application at 120 to 180 microns DFT per coat for potable use.

FEATURES:

• Very good flexibility – resists chipping and aged embrittlement
• Lighter weight – 13% lighter than most similar coatings
• Versatile surface tolerant coating
• AS/NZS 4020 Potable Water Approval
• Lower viscosity allows application at higher solids (less thinning) and reduced VOC at application
• Fast dry to recoat
• Low temperature cure to below freezing; -5°C
• Reduced HAPS and Low VOC

A multi-purpose, advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility.

FEATURES:

• Very good flexibility – resists chipping and aged embrittlement
• Versatile surface tolerant coating
• Suitable for application over surfaces prepared by water-jetting
• Good adhesion to tight rust - especially when used in conjunction with Rustbond PS or Altra~Lock 576
• Tolerant to surface dampness - particularly when brush/roller applied
• Self-priming (DTM) for many applications
• Fast dry to recoat
• Excellent dry to handling properties
• Suitable for fresh and salt water immersion
• Low temperature cure to below freezing; down to -5°C
• Reduced HAPS and Low VOC
• Cleaner colours and improved colour stability

A glass-flake filled, multi-purpose,advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility. Glass flake reinforcement enhances film strength, impact resistance and barrier properties.

FEATURES:

• Excellent physical and barrier properties
• Versatile surface tolerant coating
• Good adhesion to tight rust - especially when used in conjunction with Rustbond PS or Altra~Lock 576
• Tolerant to surface dampness - particularly when brush/roller applied
• Fast dry to recoat
• Excellent dry to handling properties
• Suitable for fresh and salt water immersion
• Low temperature cure to below freezing; down to -5°C
• Reduced HAPS and low VOC
• Cleaner colours and improved colour stability

Made to Order or imported lines subject to availability.

An ideal high performance, high build coating for any service or structure, marine or industrial, where water or corrosion resistance is required.
Has excellent proven long-term service case histories for marine hull externals, above & below water, and as a lining for hydro penstocks, gates, and similar permanently immersed structures.
Carboguard 640 is the barrier coating of choice under Sea~Barrier 1000 and 3000 antifoulings.

FEATURES:

• Excellent barrier protective properties
• Recommended for permanent fresh & salt water immersion
• Exceeds performance of coal tar epoxy coatings
• Over 35 years failure-free case history in permanent fresh-water immersion service
• Good abrasion resistance
• High volume solids
• Suitable for use on concrete surfaces
• Can be self-priming
• Easy application - thick films may be applied in one application by airless spray
• Non-bleeding

Made to Order or imported lines subject to availability. 

Suitable for single coat applications in areas such as a penstock lining at film thicknesses ranging between 400 and 1500 microns. Suitable for service in various immersion environments including industrial wastewater, slurry tanks, sea or fresh water, on buried structures, and on high wear surfaces in atmospheric exposure.

FEATURES:

• High film builds in a single coat – 0.4mm to 1.5mm
• Extensive case history in hydro penstocks & scroll casings, along with industrial wastewater processing
• Positive cure, even at low temperatures
• Highly abrasion resistant
• Unique flexibilised formulation imparts excellent impact resistance
• May be used on buried structures, structures immersed in fresh or salt water, and for atmospheric exposure
• Suitable for use with cathodic protection systems – impressed current or anode types
• Easy application qualities using properly heavy-duty airless spray equipment

High performance epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. It contains an inert flake reinforcement (micaceous iron oxide) to enhance film strength and performance. This product is ideal for industrial or heavy duty marine environments for the protection of steel against salt laden environments.

FEATURES:

• High solids, low VOC
• Low temperature cure
• Excellent wetting properties
• Excellent surface tolerance
• Excellent moisture tolerance (application)
• Fast cure response
• Suitable for immersion service in fresh or salt water after 60 minute cure at 24°C
• Approved for use in food & dairy processing plants

This fast cure high build polyaspartic coating provides excellent corrosion protection as well as long term weatherability in just one coat. It can be applied direct to metal (DTM) at 150 to 250 microns dry film thickness (DFT) to eliminate the need for typical primers and/or intermediate coats.
This significantly speeds up the painting process, saves labour, and saves money without sacrificing performance. If even better corrosion protection is desired it can be applied over our time proven Carbozinc or Carboguard primers.

FEATURES:

• Fast cure speeds the painting process
• High build, 150 to 250μm DFT per coat
• Excellent corrosion protection
• Meets ISO 12944-6 C3 High, one coat applied DTM
• Saves significant time, labour and money
• Excellent weathering
• Exceeds SSPC Coating Specification No. 39 Level 3A, highest level for aliphatic polyurea
• Exceeds SSPC Coating Specification No. 36 Level 3A, highest level for aliphatic polyurethane
• Very good flexibility and elongation
• Excellent abrasion and impact resistance
• Excellent wetting and adhesion
• Extremely durable to help provide long service life
• Low VOC and low HAPS
• Indefinite recoatability
• Successful case history for use as a quick-turn line marking system. Refer to your local representative for further information.

Specifically formulated to protect metal or masonry surfaces exposed to weather, water or chemicals.
Chem~Bar 900 may be used to protect structural steel, tanks, pipes and equipment in the following:

• Pulp and Paper Industry
• Chemical Process Industry
• Sewage and Wastewater Plants
• Water Tanks
• Refineries
• Fertiliser Plants
• Marine Installations
• Bridges
• Power Projects
  
• Shipping Containers
  

FEATURES:

• Can be used as a finish coat on a wide variety of primers, including Altex or Carboline high performance two pack primers and epoxies
  
• Self-priming on steel
  
• Can be built to 125 microns DFT
  
• Quick dry - even at low temperatures
  
• Good resistance to inorganic acids, salt solutions, alkalis, and gases
  
• Excellent adhesion to aged chlorinated rubber coatings
  
• Excellent recoatability, even after years of weathering
  
• Excellent colour retention
  
• Resists excessive chalking
  
• Available in Aluminium Finish and Metal-Spray Sealer – refer to Chem~Bar 900 Aluminium PDS

High gloss, high performance, two component, chemically cured polyaspartic urethane designed for use in areas where maximum gloss and colour retention are required.

FEATURES:

• Polyaspartic acrylic technology provides exceptional gloss and colour retention
• Outstanding cosmetic properties
• Outstanding abrasion resistance
• Excellent durability due to high flexibility and toughness
• Exceptional retention of cosmetic properties due to high UV resistance
• Outstanding chemical resistance
• Light colours along with a finish coat of Carbothane 130 Clear Coat may be used as an anti-graffiti system due to the excellent solvent resistance - refer also to and Easy~Clean SX Additive
• High volume solids - Low VOC
• Available with Ultra-Fresh Antimicrobial Additive where hygienic germ-free coating systems are required.
• Tested and in compliance to Main Roads WA - Specification 908 and NZTA (Waka Kotahi) - Specification S10 for Anti-Graffiti Coatings
• Approved for use in food & dairy processing plants

Made to Order or imported lines subject to availability. 

A glass flake-filled coating with dense cross-linking that exhibits excellent overall chemical resistance to a variety of aggressive chemicals. Glass reinforcement provides added abrasion resistance, permeation resistance and internal reinforcement.

Phenoline® 1205 exhibits very good acid resistance. Excellent for lining tanks or pipes in process facilities where hot water or abrasive conditions exist. Also used as a primary or secondary containment lining for a variety of aggressive chemicals

• Excellent resistance to ethanol, gasoline, jet fuels and solvents
• Excellent abrasion resistance
• Excellent thermal shock resistance
• Excellent resistance to deionized or demineralised water up to 82°C
• Excellent resistance to crude oil, brine or water up to 93°C

Made to Order or imported lines subject to availability. 

High solids modified novalac epoxy, with excellent low temperature cure and outstanding chemical resistance.

Provides immersion grade service for a vast range of chemicals (refer Data Sheet)  in a wide range of industries:

Wastewater

Petrochemical

Industrial manufacturing / processing

Chemical transport

Made to Order or imported lines subject to availability.

Environmentally friendly, advanced hybrid technology, plural-component applied coating used as a lining for water, wastewater, manholes, penstocks, dam gates, pipelines and other aggressive immersion applications. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service. Ultra high build product designed to be applied at high thickness in one coat application. 

FEATURES:

• High film build (5000 microns / 5mm plus) in one coat
  
• Complies with Greenbook
• UL approved for potable water*
• Cold temperature cure
• Fast cure and walk on time
• Excellent barrier properties, low permeability
• Can be used to resurface highly deteriorated concrete
• Bridges normal shrinkage cracks in concrete
• True monolithic film on steel and concrete
• Encapsulates rivets, bolts, and edges in one coat
• Outstanding abrasion, impact and tear resistance
• Combines polyurethane and polyurea technologies to form a hybrid polyurethane

*Valid if manufactured at a certified location.

Made to Order or imported lines subject to availability. 

Reactamine Joint Seal FC is a 2-component 100% solids, polyurea-based joint sealant that is self-leveling and cures in approximately 30 minutes. It works equally well with asphalt and concrete and protects interior horizontal concrete expansion and control joints from spalling, chipping and breakdown. This product can be applied at temperatures ranging from -18° to 65°C and possesses excellent chemical resistance, water resistance and thermal stability at both high and low temperatures

Rustbond PS is a very low VOC epoxy primer/sealer that combines outstanding surface tolerance characteristics over marginally prepared substrates and user-friendly features. It accepts a variety of topcoats and can help save time and money by minimising surface preparation requirements for new construction, maintenance and overcoating projects. Rustbond PS has good pot life at higher
temperatures to help minimise waste and also cures at low temperatures down to 1.7°C with Epoxy Accelerator so you have one Rustbond product for year-round application.