This fast cure high build polyaspartic coating provides excellent corrosion protection as well as long term weatherability in just one coat. It can be applied direct to metal (DTM) at 150 to 250 microns dry film thickness (DFT) to eliminate the need for typical primers and/or intermediate coats.
This significantly speeds up the painting process, saves labour, and saves money without sacrificing performance. If even better corrosion protection is desired it can be applied over our time proven Carbozinc or Carboguard primers.

FEATURES:

• Fast cure speeds the painting process
• High build, 150 to 250μm DFT per coat
• Excellent corrosion protection
• Meets ISO 12944-6 C3 High, one coat applied DTM
• Saves significant time, labour and money
• Excellent weathering
• Exceeds SSPC Coating Specification No. 39 Level 3A, highest level for aliphatic polyurea
• Exceeds SSPC Coating Specification No. 36 Level 3A, highest level for aliphatic polyurethane
• Very good flexibility and elongation
• Excellent abrasion and impact resistance
• Excellent wetting and adhesion
• Extremely durable to help provide long service life
• Low VOC and low HAPS
• Indefinite recoatability
• Successful case history for use as a quick-turn line marking system. Refer to your local representative for further information.

Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets including marine exposure where ultra durable colours are desired. Carbothane 130 Clear Coat provides a smooth, high gloss durable finish that provides superior resistance to colour fade of basecoats.

FEATURES:

• High solids, low VOC content
• Excellent weatherability
• Advanced HALS (Hindered Amine Light Stabilisers) & UV absorber technology
• Superior impact and abrasion resistance
• Excellent chemical resistance
• Excellent resistance to graffiti removers
• Tested and in compliance to Main Roads WA - Specification 908 and NZTA (Waka Kotahi) - Specification S10 for Anti-Graffiti Coatings
• Approved for use in food & dairy processing plants

High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colours

FEATURES:

• Outstanding performance properties in both mild and aggressive environments
• High build; suitable for many two-coat systems
• Approved for use in food & dairy processing plants
• Application by spray, brush or roller
• Indefinite recoatability
• VOC compliant to current AIM regulations

Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, Carbothane 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.

FEATURES:

• High solids, low VOC content
• Excellent weatherability
• Exceeds SSPC Paint 36 specification for a Level 3 urethane
• Conforms to the requirements of AS/NZS 3750.6:2009, Type 1 "Paints for Steel Structures - Full Gloss Polyurethane (two pack)"
• Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
• Very good aged re-coatability
• Excellent flow characteristics allow for application by spray or roller
• Superior impact and abrasion resistance
• Indefinite recoatability

High gloss, high performance, two component, chemically cured polyaspartic urethane designed for use in areas where maximum gloss and colour retention are required.

FEATURES:

• Polyaspartic acrylic technology provides exceptional gloss and colour retention
• Outstanding cosmetic properties
• Outstanding abrasion resistance
• Excellent durability due to high flexibility and toughness
• Exceptional retention of cosmetic properties due to high UV resistance
• Outstanding chemical resistance
• Light colours along with a finish coat of Carbothane 130 Clear Coat may be used as an anti-graffiti system due to the excellent solvent resistance - refer also to and Easy~Clean SX Additive
• High volume solids - Low VOC
• Available with Ultra-Fresh Antimicrobial Additive where hygienic germ-free coating systems are required.
• Tested and in compliance to Main Roads WA - Specification 908 and NZTA (Waka Kotahi) - Specification S10 for Anti-Graffiti Coatings
• Approved for use in food & dairy processing plants

Fast cure, high gloss, aliphatic polyurethane which is ideal for use where a polyurethane finish is specified and where rapid drying is desirable. It will provide good gloss and colour retention as well as resistance to moderate to severe corrosive environments for:

• Structural Steel
• Shop application
• Chemical processing industry
• Pulp and paper industry
• Dairy industry
• Bridges and storage tanks
• Fishing vessels
• Off-shore structures
• Shoreside facilities

FEATURES:

• Fast dry to handling - increased throughput
• Rapid dry to recoat
• Good gloss retention and colour retention
• Good chemical resistance
• Good abrasion resistance
• Excellent durability due to high flexibility and toughness
• Good retention of cosmetic properties due to high UV resistance
• Good resistance to marring, chipping, and scratching
• Wide colour selection
• Excellent aged recoatability
• Approved for use in food & dairy processing plants

Availability: Australia only

Multi-Gard GP 48 is fast-dry polyurethane coating which provides a high gloss finish which has excellent corrosion, abrasion and chemical resistance.
The Multi-Gard GP (general purpose) products are formulated to protect steel substrates in a variety of service exposures typical of industrial OEM equipment destinations and commercial marine conditions. The Multi-Gard line tends toward rapid cure to handle and re-coat to facilitate through-put in shop painting applications.

FEATURES:

• Direct-to-metal (when used with GP 88 Part B)
• Fast dry and handle times
• Excellent abrasion and chemical resistance
• Excellent gloss and colour retention
• Suitable for OEM applications
• Excellent aged re-coatability when cleaned with Altex P40 Cleaner
• Applied by air, or airless spray