A single pack steel primer designed for use in industrial and marine applications

FEATURES:

• Single pack direct to steel primer
• Excellent corrosion protection
• Fast dry time
• Excellent application properties
• Excellent water immersion resistance
• Reinforced with aluminium flake
• Cost effective & easy to use product for dockings
• Simplified coating system for maintenance repaints in the commercial marine sector
• Extended time to overcoat with antifoulings
• A barrier/seal coat over aged or incompatible/unknown antifoulings or a tie coat over suitably prepared, aged epoxy coatings prior to application of the selected Sea~Barrier antifouling
• A sealant to assist in the prevention of TBT leaching from an underlying antifouling coating - provided it is applied at a minimum dry film thickness of 80 microns (minimum 2 coats by roller)
• Supported by many case histories within the commercial marine market over sequential dockings

Specifically formulated to protect metal or masonry surfaces exposed to weather, water or chemicals.
Chem~Bar 900 may be used to protect structural steel, tanks, pipes and equipment in the following:

• Pulp and Paper Industry
• Chemical Process Industry
• Sewage and Wastewater Plants
• Water Tanks
• Refineries
• Fertiliser Plants
• Marine Installations
• Bridges
• Power Projects
• Shipping Containers
  

FEATURES:

• Can be used as a finish coat on a wide variety of primers, including Altex or Carboline high performance two pack primers and epoxies
• Self-priming on steel
• Can be built to 125 microns DFT
• Quick dry - even at low temperatures
• Good resistance to inorganic acids, salt solutions, alkalis, and gases
• Excellent adhesion to aged chlorinated rubber coatings
• Excellent recoatability, even after years of weathering
• Excellent colour retention
  
• Resists excessive chalking
• Available in Aluminium Finish and Metal-Spray Sealer – refer to Chem~Bar 900 Aluminium PDS

A specialised variant of the well-proven Chem~Bar 900. A high-performance aluminium-filled vinyl acrylic suitable for use as a general-purpose aluminium finish and for sealing thermal metal spray.

Chem~Bar 900 Aluminium may be used in all atmospheric exposures where traditional aluminium finishes may be employed; including:

• Pulp and Paper Industry
• Chemical Process Industry
• Sewage and Waste Water Plants
• Water Tank & Silo Exteriors
• Refineries
• Fertiliser Plants
• Marine Installations
• Bridges
• Power Projects
• Shipping Containers

FEATURES:

• Developed from proven technology
• Quality aluminium finish
• Designed for use as a sealer over: zinc metal spray, zinc/aluminium 95/5 metal spray, aluminium metal spray
• Improves the appearance of metal spray
• Increases the performance life of metal spray
• Long term self-recoatability with minimal surface preparation

TP Vinyl FC Finish is designed as the finish coat for the repainting of aged, weathered galvanised structures. It is used in conjunction with TP Vinyl FC Primer.

FEATURES:

• Ready to apply after mixing; normally thinning is not required
• Excellent application properties
• MIOX pigmented providing barrier protection
• Compatible with vinyl and chlorinated rubber primers
• Indefinite recoat

TP Vinyl FC Primer is specifically formulated for the priming of aged, weathered galvanised structures.

FEATURES:

• Ready to apply after mixing; normally thinning is not required
• Excellent application properties
• MIOX pigmented providing barrier protection
• Compatible with vinyl and chlorinated rubber primers
• Indefinite recoat