logo

Altra~Zinc 605

High performance, two component, reinforced epoxy zinc-rich primer designed for use as a cathodic primer for protecting steel exposed to a variety of environments.

FEATURES:

  • Premium performance primer for most industrial systems.
  • Resists topcoat pinholing
  • Resistant to dry spray, mudcracking and topcoat bubbling
  • Easy to mix - zinc pre-mixed into base component
  •  Easy application by brush, roller, or spray
  • Fast dry-to-recoat times
  • Good low temperature cure
  • Good solvent resistance
  • Safe - contains no lead or chromate pigments
  • Versatile - can be used as the primer under numerous coating systems including fireproofing

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carboguard 504

A high performance, immersion grade (fresh & salt water) chemically cured epoxy primer. Suitable for use over suitably prepared mild steel, galvanised steel, other non-ferrous metals, and most GRP substrates.

FEATURES:

  • Excellent primer for water and many aqueous chemicals immersion service when topcoated with an approved finish
  • Excellent adhesion to difficult substrates
  • Excellent holding primer
  • Excellent corrosion resistance
  • Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types 1, 2 & 3.
  • Approved for use in NZ Food Processing Plants
  • Good abrasion resistance
  • Very good aged re-coatability
  • Resists splash and spillage or fumes of a wide range of chemicals
  • Easy application by brush, roller or spray
  • Ideal tie-coat over inorganic zincs
  • Versatile - can be used on most substrates under many different types of topcoat
  • Long pot-life
  • Excellent maintenance touch-up primer for hand-cleaned substrates
  • A user-friendly primer for epoxy or polyurethane systems in environments not suited to zinc primers due to acidic or alkaline fallout or splash & spill
  • Excellent tie-coat over high build epoxies as an extended 2-3 day recoat window with Sea~Barrier Antifoul series – Carboguard 504 Grey is preferred. Refer to Technical Services for further advice

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carboguard 504 ZP

Availability: Australia only

A high performance, immersion grade (fresh & salt water) chemically cured, zinc phosphate epoxy primer. Suitable for use over suitably prepared mild steel, galvanised steel, other non-ferrous metals, and most GRP substrates.

FEATURES:

  • Excellent adhesion to difficult substrates
  • Excellent holding primer
  • Excellent corrosion resistance
  • Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types 1, 2 & 3.
  • Good abrasion resistance
  • Very good aged re-coatability
  • Resists splash and spillage or fumes of a wide range of chemicals
  • Easy application by brush, roller or spray
  • Versatile - can be used on most substrates under many different types of topcoat
  • Long pot-life
  • Excellent maintenance touch-up primer for hand-cleaned substrates
  • A user-friendly primer for epoxy or polyurethane systems in environments not suited to zinc primers due to acidic or alkaline fallout or splash & spill
  • Excellent tie-coat over high build epoxies as an extended 2-3 day recoat window with Sea~Barrier Antifoul series. Refer to Technical Services for further advice

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carboguard 636 PW

Made to Order or imported lines subject to availability.

High performance immersion grade epoxy that is designed as a liner for potable water tanks. This coating exhibits moisture tolerance during application, low temperature cure capability, and fast cure response for quick return to service. Product is self-priming on steel and is normally applied in two coats. Formulated for application at 120 to 180 microns DFT per coat for potable use.

FEATURES:

  • Very good flexibility – resists chipping and aged embrittlement
  • Lighter weight – 13% lighter than most similar coatings
  • Versatile surface tolerant coating
  • AS/NZS 4020 Potable Water Approval
  • Lower viscosity allows application at higher solids (less thinning) and reduced VOC at application
  • Fast dry to recoat
  • Low temperature cure to below freezing; -5°C
  • Reduced HAPS and Low VOC

 

Availability :- New Zealand

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carboguard 636 XT

A multi-purpose, advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility.

FEATURES:

  • Very good flexibility – resists chipping and aged embrittlement
  • Versatile surface tolerant coating
  • Suitable for application over surfaces prepared by water-jetting
  • Good adhesion to tight rust - especially when used in conjunction with Rustbond PS or Altra~Lock 576
  • Tolerant to surface dampness - particularly when brush/roller applied
  • Self-priming (DTM) for many applications
  • Fast dry to recoat
  • Excellent dry to handling properties
  • Suitable for fresh and salt water immersion
  • Low temperature cure to below freezing; down to -5°C
  • Reduced HAPS and Low VOC
  • Cleaner colours and improved colour stability

Availability :

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carboguard 636 XT GF

A glass-flake filled, multi-purpose,advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility. Glass flake reinforcement enhances film strength, impact resistance and barrier properties.

FEATURES:

  • Excellent physical and barrier properties
  • Versatile surface tolerant coating
  • Good adhesion to tight rust - especially when used in conjunction with Rustbond PS or Altra~Lock 576
  • Tolerant to surface dampness - particularly when brush/roller applied
  • Fast dry to recoat
  • Excellent dry to handling properties
  • Suitable for fresh and salt water immersion
  • Low temperature cure to below freezing; down to -5°C
  • Reduced HAPS and low VOC
  • Cleaner colours and improved colour stability

Availability :

View More Product Data Sheet 

Carboguard 640

Made to Order or imported lines subject to availability.

An ideal high performance, high build coating for any service or structure, marine or industrial, where water or corrosion resistance is required.
Has excellent proven long-term service case histories for marine hull externals, above & below water, and as a lining for hydro penstocks, gates, and similar permanently immersed structures.
Carboguard 640 is the barrier coating of choice under Sea~Barrier 1000 and 3000 antifoulings.

FEATURES:

  • Excellent barrier protective properties
  • Recommended for permanent fresh & salt water immersion
  • Exceeds performance of coal tar epoxy coatings
  • Over 35 years failure-free case history in permanent fresh-water immersion service
  • Good abrasion resistance
  • High volume solids
  • Suitable for use on concrete surfaces
  • Can be self-priming
  • Easy application - thick films may be applied in one application by airless spray
  • Non-bleeding

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet 

Carbothane 133 LH

High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colours

FEATURES:

  • Outstanding performance properties in both mild and aggressive environments
  • High build; suitable for many two-coat systems
  • Approved for use in food & dairy processing plants
  • Application by spray, brush or roller
  • Indefinite recoatability
  • VOC compliant to current AIM regulations

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbothane 134 HG

Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, Carbothane 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.

FEATURES:

  • High solids, low VOC content
  • Excellent weatherability
  • Exceeds SSPC Paint 36 specification for a Level 3 urethane
  • Conforms to the requirements of AS/NZS 3750.6:2009, Type 1 "Paints for Steel Structures - Full Gloss Polyurethane (two pack)"
  • Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
  • Very good aged re-coatability
  • Excellent flow characteristics allow for application by spray or roller
  • Superior impact and abrasion resistance
  • Indefinite recoatability

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carboxane 2000

Made to Order or imported lines subject to availability.

Carboxane 2000 is an isocyanate-free, ultra-durable coating that provides outstanding colour and gloss retention as well as excellent corrosion protection for exterior exposures. When used over a suitable primer (as a two coat system) Carboxane 2000 provides the barrier, corrosion resistance properties, and weatherability normally achieved with a three-coat system (primer, epoxy intermediate with an acrylic-polyurethane finish) for most environments. This significantly speeds up the painting process, saves labour, and saves money without sacrificing performance. This tightly cross-linked film utilises a UV-resistant siloxane binder resulting in a finish with excellent corrosion protection and weathering performance that far exceeds aliphatic polyurethanes.

FEATURES:

  • Isocyanate free
  • Exceptional weatherability
  • Outstanding colour and gloss retention
  • Exceeds SSPC Coating Specification No. 36 Level 3A
  • Excellent corrosion protection
  • Meets ISO 12944 C3 High and C4 Medium, one coat applied at 125 to 175 microns DFT
  • High build, 75 to 175 microns DFT
  • Saves significant time, labour, and money
  • Long service life
  • VOC compliant
  • Excellent durability
  • Good flexibility and abrasion resistance
  • Long pot life

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbozinc 11

Time-tested corrosion resistant primer that provides excellent corrosion protection to steel in some of the harshest environments. For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide.

FEATURES:

  • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
  • Rapid cure. Dry to handle in 45 minutes at 16°C (60°F) and 50% relative humidity
  • Low temperature cure down to -18°C
  • High zinc loading
  • Meets FDA requirements
  • Zinc supplied meets ASTM D520 (Type II)
  • Meets SSPC Paint 20 Type I, Level 1 for zinc content
  • Complies with the composition and performance requirements of AS/NZS 3750.15, Type 4 and AS 4848.1 "Single Coat Inorganic Zinc Silicate"
  • Very good resistance to salting
  • May be applied with standard airless or conventional spray equipment
  • Approved for use in food & dairy processing plants

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbozinc 11 WB

Made to Order or imported lines subject to availability.

Carbozinc 11 WB is a water-based inorganic zinc rich primer that protects steel galvanically, eliminating subfilm corrosion. It meets VOC regulations while providing the proven performance of silicate zinc rich technology. It may be used as a primer under many different types of topcoats.

FEATURES:

  • Excellent corrosion protection
  • High zinc loading per square foot
  • Zero VOC
  • Good resistance to salting
  • Fast curing, quick handling
  • Excellent application characteristics (less likely to pump packing or tip plugging)
  • Meets Class B slip coefficient* and creep testing criteria for use on faying surfaces
  • Conforms to AS/NZS 3750.15 Type 3

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbozinc 15-625

A high performance, two component, organic zinc-filled primer specifically formulated to provide corrosion protection to steel surfaces in salt and weathering environments. It has good surface tolerant characteristics where steel surface preparation may be less than ideal. It may also be used for the repair of aged inorganic zinc-rich coatings or galvanised steel surfaces.

FEATURES:

  • Exceptional corrosion resistance
  • Extremely high zinc loading - 90% by weight in dry film
  • Provides excellent cathodic protection
  • Excellent adhesion to commercial blast cleaned surfaces
  • Excellent for repairs to inorganic zinc silicate primers and aged/deteriorated galvanising
  • Meets the requirements of AS/NZS 3750.9, Type 2 Organic Zinc Rich
  • Conforms to the composition and performance requirements of SSPC-Paint 20 Type II Organic
  • As a brush applied maintenance primer tolerant to traces of surface moisture
  • As a holding / weld-through primer when applied less than 25 microns dry

Availability :

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbozinc 858

NEW 4:1 Ratio

A high-solids, zinc-filled epoxy primer for corrosion protection of structural steel in salt and weathering environments. This high performance primer has quick cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. It has excellent adhesion and undercutting resistance and is outstanding for use as a corrosion resistant primer for a variety of applications.

FEATURES:

  • Protects steel galvanically
  • Outstanding application properties
  • Cures at low temperatures down to 2ºC
  • Complies with AS 3750.9:1994 Type 2 Organic Zinc Rich
  • Suitable for application over Wet Abrasive Blast cleaned surfaces
  • Protects against corrosion under-cutting
  • Tough and abrasion resistant film
  • Ideal for severe industrial or marine environments with appropriate topcoats
  • Approved for use in food & dairy processing plants

Availability :

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Carbozinc 859 EZ2

A two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates. Carbozinc 859 EZ2 can be applied by conventional or airless spray. Recommended where a high performance, highly corrosion resistant zinc primer is desired. Typical applications include structural steel, tanks, piping, equipment and other miscellaneous parts in industrial or architectural projects.

FEATURES:

  • Excellent application properties
  • Tough abrasion resistant film
  • Excellent adhesion & undercutting resistance
  • Superior corrosion resistance
  • Meets VOC (Volatile Organic Content) regulations, <335 g/litre
  • Fast drying for recoat
  • Meets or exceeds SSPC Paint System 20 Level 3 (2002)
  • Excellent film forming properties eliminate topcoat blistering
  • Excellent resistance to salting on weathering exposure

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Chem~Bar 900

Specifically formulated to protect metal or masonry surfaces exposed to weather, water or chemicals.
Chem~Bar 900 may be used to protect structural steel, tanks, pipes and equipment in the following:

  • Pulp and Paper Industry
  • Chemical Process Industry
  • Sewage and Wastewater Plants
  • Water Tanks
  • Refineries
  • Fertiliser Plants
  • Marine Installations
  • Bridges
  • Power Projects
  • Shipping Containers

FEATURES:

  • Can be used as a finish coat on a wide variety of primers, including Altex or Carboline high performance two pack primers and epoxies
  • Self-priming on steel
  • Can be built to 125 microns DFT
  • Quick dry - even at low temperatures
  • Good resistance to inorganic acids, salt solutions, alkalis, and gases
  • Excellent adhesion to aged chlorinated rubber coatings
  • Excellent recoatability, even after years of weathering
  • Excellent colour retention
  • Resists excessive chalking
  • Available in Aluminium Finish and Metal-Spray Sealer – refer to Chem~Bar 900 Aluminium PDS

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Chem~Bar 900 Aluminium

A specialised variant of the well-proven Chem~Bar 900. A high-performance aluminium-filled vinyl acrylic suitable for use as a general-purpose aluminium finish and for sealing thermal metal spray.

Chem~Bar 900 Aluminium may be used in all atmospheric exposures where traditional aluminium finishes may be employed; including:

  • Pulp and Paper Industry
  • Chemical Process Industry
  • Sewage and Waste Water Plants
  • Water Tank & Silo Exteriors
  • Refineries
  • Fertiliser Plants
  • Marine Installations
  • Bridges
  • Power Projects
  • Shipping Containers

FEATURES:

  • Developed from proven technology
  • Quality aluminium finish
  • Designed for use as a sealer over: zinc metal spray, zinc/aluminium 95/5 metal spray, aluminium metal spray
  • Improves the appearance of metal spray
  • Increases the performance life of metal spray
  • Long term self-recoatability with minimal surface preparation

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

E~Line 379

High gloss, high performance, two component, chemically cured polyaspartic urethane designed for use in areas where maximum gloss and colour retention are required.

FEATURES:

  • Polyaspartic acrylic technology provides exceptional gloss and colour retention
  • Outstanding cosmetic properties
  • Outstanding abrasion resistance
  • Excellent durability due to high flexibility and toughness
  • Exceptional retention of cosmetic properties due to high UV resistance
  • Outstanding chemical resistance
  • Light colours along with a finish coat of Carbothane 130 Clear Coat may be used as an anti-graffiti system due to the excellent solvent resistance - refer also to and Easy~Clean SX Additive
  • High volume solids - Low VOC
  • Available with Ultra-Fresh Antimicrobial Additive where hygienic germ-free coating systems are required.
  • Tested and in compliance to Main Roads WA - Specification 908 and NZTA (Waka Kotahi) - Specification S10 for Anti-Graffiti Coatings
  • Approved for use in food & dairy processing plants

Availability :- New Zealand- Australia

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Glass Flake Additive

Reinforcing additive for a range of Carboguard epoxy coatings

Availability :

View More NZ Safety Data Sheet Aus. Safety Data Sheet

Phenoline Tank Shield FP

Made to Order or imported lines subject to availability.

This product is a solvent-free, high performance epoxy coating specifically designed as a pit filling primer with ideal flow properties allowing it to wet-out and fill moderate to severe pitting on steel tank bottoms. It's unique formula allows batch mixing for ease of application. With an appropriate lining, it can withstand exposures typically seen in the oil and gas industries. It is resistant to crude oil, NGL condensates, produced water, brines, and industrial process water.

FEATURES:

  • Highly penetrating formula to handle severe pitting
  • Blast hold protection
  • Batch mix formulation, single leg airless spray
  • Superior adhesion to steel
  • Excellent abrasion resistance and flexibility
  • Can be applied down to 2°C
  • Can be used with multiple lining systems
  • Non-blushing with a long recoat window
  • Convenient packaging for batch mix
  • Tested and approved to AS/NZS 4020:2018 when topcoated with Phenoline Tank Shield (refer to data sheet)
  • Low odour

Availability :

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Reactamine 760 HB

Made to Order or imported lines subject to availability.

Environmentally friendly, advanced hybrid technology, plural-component applied coating used as a lining for water, wastewater, manholes, penstocks, dam gates, pipelines and other aggressive immersion applications. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service. Ultra high build product designed to be applied at high thickness in one coat application. 

FEATURES:

  • High film build (5000 microns / 5mm plus) in one coat
  • Complies with Greenbook
  • UL approved for potable water*
  • Cold temperature cure
  • Fast cure and walk on time
  • Excellent barrier properties, low permeability
  • Can be used to resurface highly deteriorated concrete
  • Bridges normal shrinkage cracks in concrete
  • True monolithic film on steel and concrete
  • Encapsulates rivets, bolts, and edges in one coat
  • Outstanding abrasion, impact and tear resistance
  • Combines polyurethane and polyurea technologies to form a hybrid polyurethane

*Valid if manufactured at a certified location.

Availability :

View More Product Data Sheet NZ Safety Data Sheet 

Rustbond PS

Rustbond PS is a very low VOC epoxy primer/sealer that combines outstanding surface tolerance characteristics over marginally prepared substrates and user-friendly features. It accepts a variety of topcoats and can help save time and money by minimising surface preparation requirements for new construction, maintenance and overcoating projects. Rustbond PS has good pot life at higher temperatures to help minimise waste and also cures at low temperatures down to 1.7°C with Epoxy Accelerator so you have one Rustbond product for year-round application.

FEATURES:

  • Excellent wicking characteristics resulting in very good adhesion to a variety of substrates
  • Low stress during application and cure, can be applied over aged coatings and tight rust
  • Universal primer and tie-coat
  • Very low VOC, less than 100 g/l, and low odour for compliance in many stringent locations
  • Low temperature cure with Epoxy Accelerator to extend the painting season
  • Good pot life in hotter weather without Epoxy Accelerator, one Rustbond PS for year-round application
  • User-friendly application with brush, roller, and spray
  • Tolerates higher dry film thickness (DFT) range, easier to apply
  • Excellent sealer for metallising and thermal sprayed aluminium (TSA)

Availability :

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

TP Vinyl FC Finish

TP Vinyl FC Finish is designed as the finish coat for the repainting of aged, weathered galvanised structures. It is used in conjunction with TP Vinyl FC Primer.

FEATURES:

  • Ready to apply after mixing; normally thinning is not required
  • Excellent application properties
  • MIOX pigmented providing barrier protection
  • Compatible with vinyl and chlorinated rubber primers
  • Indefinite recoat

Availability :

View More Product Data Sheet NZ Safety Data Sheet 

TP Vinyl FC Primer

TP Vinyl FC Primer is specifically formulated for the priming of aged, weathered galvanised structures.

FEATURES:

  • Ready to apply after mixing; normally thinning is not required
  • Excellent application properties
  • MIOX pigmented providing barrier protection
  • Compatible with vinyl and chlorinated rubber primers
  • Indefinite recoat

Availability :

View More Product Data Sheet NZ Safety Data Sheet 

Thermaline Heat Shield

Made to order or imported product subject to availability.

This is an extreme performance coating for hot, cryogenic and cycling exposures. Thermaline Heat Shield contains a unique blend of plate-like reinforcing pigments fortified with an inert polymeric matrix. The resulting film provides an outstanding barrier against corrosives and harsh exposures typically seen in elevated temperature environments. This versatile coating is ideal for all piping, vessels and equipment operating from cryogenic conditions up to 650°C (1200°F). It is particularly well suited to prevent corrosion under insulated equipment/piping for both carbon steel substrates and stainless steels. This fortified coating has superior shop handling properties over standard silicone coatings (see Curing). It is recommended for CS-6 and SS-5 systems of NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI).

FEATURES:

  • Unique reinforced but flexible polymer film
  • Versatile use from cryogenic to 650°C (1200°F) exposures
  • Dries to handle without heat cure (See curing schedule)
  • Outstanding barrier properties
  • Protects steel from thermal wet cyclic conditions
  • Suitable for both shop and field application
  • Provides corrosion protection even with ambient temperature cure
  • Self priming or apply over Carbozinc 11 primers when uninsulated
  • Protects stainless steels from chlorides and stress corrosion cracking
  • Very fast recoat times

Availability :

View More Product Data Sheet NZ Safety Data Sheet Aus. Safety Data Sheet

Offline

* Sorry, we aren’t online at the moment. Please fill out the form below and we will get back to you as soon as possible.